Sharp VC-A410U, Operation Manual

Page: 17 / 38

17
Dimensions: 257
⳯
182 mm
F L E ( M ) S d n . B h d . V C - A 4 2 0 U ( 1 6 - 2 0 )
Setting the Clock
• If the EDS CH SET mode is set to MANUAL mode in Step
#
and a channel that does not carry EDS signal is selected in
Step
$
, the Auto Clock Setting function will not operate.
• In Step
$
, the number of channels that can be selected depends on the mode setting on the CHANNEL PRESET screen.
See the table below.
• In Step
!
, if you press MENU when operating the screen setting for the first time or after a power failure of more than 5
seconds, the LANGUAGE screen will appear.
• If you entered incorrect data during the setting procedure, re-enter the correct data in the following manner:
1
Use
ß
/
©
to select the data to be corrected.
2
Set the correct data with
∂
/
ƒ
.
3
After correcting the data in Step
2
, press SET to enter.
• If you press MENU in Step
%
, the data will not be stored.
• If a button is not pressed within 3 minutes during the setting procedure, the screen will return to the normal screen.
Manual Clock Setting
• Turn on your TV and select the video channel. (See Setting the 3
↔
4 Output Channel Selector .)
• Press POWER (POWER LED indicator will light up) and then TV/VCR to select “VCR”. (VCR LED indicator will
light up.)
E D S C H S E T A U T O M A N U A L
E D S C H 0 7
ß
©
!
Press MENU .
Select “CLOCK” with
∂
/
ƒ
and then press SET .
@
Select “MANUAL” with
∂
/
ƒ
and then press SET .
∂
ƒ
佡
S E T U P
M E N U
E N T E R : S E T E X I T : M E N U
C H A N N E L P R E S E T
S E L E C T :
C L O C K
L A N G U A G E
T I M E R
佡
∂
ƒ
佡
S E L E C T :
M A N U A L
C L O C K
E N T E R : S E T E X I T : M E N U
A U T O
AIR/CATV Channels to be selected
AIR
CATV
02 03 04 68 69 02
01 02 03 124 125 01
$
Select a channel that carries EDS signals with
ß
/
©
.
Ex.: 07
• The number of channels that can be selected depends
on the mode setting on the CHANNEL PRESET screen.
See
NOTE .
When using a cable box:
Input the output channel (02, 03 or 04) of the cable box.
%
Press SET to enter. The screen returns to normal.
Press POWER to turn off the VCR (VCR LED indicator will
turn off and POWER LED indicator will turn off).
The Auto Clock Setting function will automatically set the
clock.
Normal
Screen
佡 佡