25
Dimensions: 257
⳯
182 mm
F L E ( M ) S d n . B h d .
V C - A 4 2 0 U ( 2 5 - 2 9 )
• Turn on the TV and select the video channel. (See
Setting the 3
↔
4 Output Channel Selector
.)
• Press
POWER
(POWER LED indicator will light up) and then
TV/VCR
to select “VCR” (VCR LED indicator will
light up).
Only for Hi-Fi models
• If necessary, set “SAP” on the SET UP-selection screen.
(See Mode Selection.)
Without a Cable Box or Digital Satellite Receiver
!
Insert the cassette, with the erasure protection tab covered. (See
Cassette Erase Protection
below.)
@
Press
TAPE SPEED
on the remote control to set the recording speed (SP or EP). (See
Recording Speeds
below.)
#
Select the desired channel with
CH
∂
/
ƒ
or the numbered buttons on the remote control.
$
Press
REC
. The REC LED indicator light up (If the erasure protection tab has been removed, the cassette
will be ejected.)
%
To stop recording, press
STOP
. The REC LED indicator will turn off.
* To pause recording during the REC mode, press
PAUSE/STILL
on the remote control (The REC LED indicator will flash). To
resume recording, press
PAUSE/STILL
or
REC
and at the same time REC LED indicator will turn on. (Pause disengages
automatically after about 5 minutes to avoid damage to the tape and the VCR and stop mode is engaged.)
With a Cable Box or Digital Satellite Receiver
!
Insert the cassette, with the erasure protection tab covered. (See
Cassette Erase Protection
below.)
@
Press
TAPE SPEED
on the remote control to set the recording speed (SP or EP). (See
Recording Speeds
below.)
#
Set the TV and VCR channels to output CH of cable box or digital satellite receiver.
$
Set the cable box or digital satellite receiver to the desired channel to record.
%
Press
REC
. The REC LED indicator light up (If the erasure protection tab has been removed, the cassette
will be ejected.)
^
To stop recording, press
STOP
. The REC LED indicator will turn off.
• You will be unable to watch a scrambled channel while recording.
• It is not necessary to set the clock to use this recording operation.
• “PAUSE” will flash on the TV screen if
PAUSE/STILL
is pressed in stop mode. Press
STOP
to disengage the pause mode
or press
REC
to enter the record standby mode at the same time REC LED indicator will flash, then press
REC
or
PAUSE/STILL
button again to enter record. (The REC LED indicator will light up.)
• The VCR can record a TV program even with the TV turned off.
To Watch Another TV Program While Recording
While recording, press
TV/VCR
to select “TV” (the VCR LED indicator will turn off to indicate TV mode), then
select the program you wish to view using the TV tuner.
At the end of the tape, your VCR will automatically stop recording, rewind the tape, eject it and turn off the
power.
Cassette Erase Protection
A
cassette has a removable tab to prevent accidental erasure of
recorded material. Removing the tab prevents recording. To record on a
video cassette with the tab removed, place adhesive tape over the tab
opening.
Recording Speeds
This VCR lets you select a recording speed (SP or EP). SP provides
a better picture, although the recording time is shorter. Select the
tape speed that best suits your needs.
• This VCR can play back tapes recorded in LP (Long Play) mode.
Recording a TV Program
Recording
ERASURE PROTECTION TAB
T-60
T-120
T-160
CASSETTE
MODE
SP
(Standard Play)
1 hr.
2 hrs.
2 hrs. & 40 min.
EP
(Extended Play)
3 hrs.
6 hrs.
8 hrs.
Summary of Contents for VC-A410U
Page 37: ...37 Memo ...
