background image

29

Dimensions: 257 

 182 mm

F L E   ( M )   S d n .   B h d .

V C - A 4 1 0 / 4 2 0 U   ( 2 5 - 2 9 )

• Turn on the TV and select the video channel.
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (POWER

LED indicator will light up).

• Press 

TV/VCR

 to select “VCR” (VCR LED indicator will light up).

• Check that the clock is displaying the correct time.

Only for Hi-Fi models

• If necessary, set “SAP” on the SET UP–selection screen. (See 

Mode Selection

.)

Recording with the Timer

Example:

Recording a TV program in the SP mode: the TV program is on channel 7 starting at 9:05 PM and
stopping at 10:35 PM on August 10th. The present time is 6:35 PM on August 10th.

      2 / 2

                                          1 / 2

E N T E R     : S E T     E X I T     : M E N U

- - / - -   - - -     - : - -     - : - -   - -

S E L E C T   :

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

C L E A R     : C A N C E L

- - / - -   - - -     - : - -     - : - -   - -

©

ƒ

                                          1 / 2

  8 / 1 0

    0 7    

- : - -     - : - -   S P

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

- - / - -   - - -     - : - -     - : - -   - -

©

ƒ

!

Press 

PROG.

. The Timer screen will appear and then

press 

SET

.

@

Select the desired month/day (DATE) with 

/

ƒ

 and then

press 

©

. The cursor will move to the next column.

Ex.: August 10th

• If you want to record every day or week at the same

time, hold 

ƒ

 when you select the date.

#

Select the desired channel with 

/

ƒ

 and then press 

©

.

Ex.: Channel 07

$

Set the recording start time (hour digits and minute digits)
with 

/

ƒ

 and then press 

©

.

Ex.: 9:05 PM

Press the 

AM/PM (100)

 to select AM or PM.

%

Set the recording stop time with 

/

ƒ

 and then press 

©

.

Ex.: 10:35 PM

^

Select the tape speed with 

/

ƒ

.

Ex.: SP

When pressing:    The recording date changes in this sequence:

8/10  MO-FR  MO-SA  DAILY  SAT  SUN  8/9  8/8

8/10        8/11       8/12    8/8    8/9    SUN    SAT

(next year)

(next year)

(present) (tomorrow)

                                          1 / 2

  8 / 1 0     0 7

 

  9 : 0 5 PM

 1 0 : 3 5 PM 

S P

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

- - / - -   - - -     - : - -     - : - -   - -

©

ƒ

                                          1 / 2

  8 / 1 0     0 7

    9 : 0 5 PM   

- : - -   S P

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

- - / - -   - - -     - : - -     - : - -   - -

ƒ

©

                                          1 / 2

  8 / 1 0     0 7

 

  9 : 0 5 PM

 

1 0 : 3 5 PM

 S P

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

- - / - -   - - -     - : - -     - : - -   - -

ƒ

                                          1 / 2

E N T E R     : S E T     E X I T     : M E N U

  8 / 1 0  

- - -     - : - -     - : - -   S P

S E L E C T   :           C H A N G E :

- - / - -   - - -     - : - -     - : - -   - -

- - / - -   - - -     - : - -     - : - -   - -

  D A T E     C H     S T A R T   S T O P

- - / - -   - - -     - : - -     - : - -   - -

Summary of Contents for VC-A410U







































Reviews: