Sharp UX-385, Operation Manual

Page: 44 / 107

42
3. Receiving Documents
Using TEL/FAX Mode
Press the RECEPTION
MODE key until the
arrow in the display
points to TEL/FAX.
FAX TEL
A.M. TEL/FAX
When the reception mode is set to TEL/FAX, your fax automatically answers all calls
on 2 rings. After answering, your fax monitors the line for about 5 seconds to see if a
fax tone is being sent.
♦
If your fax detects a fax tone (this means that the call is an automatically dialled
fax), it will automatically begin reception of the incoming document.
♦
If your fax doesn't detect a fax tone (this means that the call is a voice call or
manually dialled fax), it will make a ringing sound (called pseudo ringing) for 15
seconds to alert you to answer. If you don't answer within this time, your fax will
send a fax tone to the other machine to allow the calling party to send a fax
manually if they desire.
Comments:
♦
Only the fax will alert you to voice calls or manually dialled faxes by pseudo
ringing. An extension phone connected to the same line will not ring after the
connection has been made.
♦
The duration of pseudo ringing can be adjusted with Option Setting 8. See
Chapter 8, Option Settings.
♦
You can change the number of rings on which the machine answers calls by
changing Option Setting 2. (See Chapter 8, Option Settings.)
RECEPTION
MODE
all_ux385gg.book Page 42 Thursday, February 22, 2001 10:50 AM