manualshive.com logo in svg

Sharp UP-3500, Instruction Manual

Share
Download
Sharp UP-3500 Instruction Manual Download Page 90

88

Ordering System

■

■

■

■

■

  Customer advance ordering

Perform this function to register a customer advance order.
An ordering number is assigned to each customer advance order. Every time a new customer advance
order is registered, an incremented ordering number is assigned to the order. If the order is finalized or
canceled, the once-assigned ordering number will never be used again.

•••••

 New ordering

1) Touch the 

[ADVANCE_ORDER]

 key, the following window is displayed.

2) Touch the 

[NEW]

 key, the following window is displayed.

To cancel the operation, touch the 

[CANCEL]

 key.

3) Enter each item (DATE/TIME) and touch the 

[ENTER]

 key.

4) Perform the sales registration entry.

New advanced orders must be temporarily closed with the 

[NBAL]

 or 

[FINAL]

 key. When the purchase

order date comes, finalize them by cash, check or credit tendering.

Summary of Contents for UP-3500

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands