Sharp UP-3500 Instruction Manual Download

Page: 25 / 344

Classification

Description

Function

GUEST#

Used to enter the guest number.

RECALL_TRANS.

Used to re-call the corresponding transaction.

INTER_MED.

Intermediate GLU key

B.T.

Bill totalizing

B.S._ITEM

Bill separation by items

B.S._AMOUNT

Bill separation by amount

B.S._PERSON

Bill separate by person

B.S._RETURN

Used to return B.S. mode.

SPLIT

Used to split the order

TRANS_OUT

Used to enter the transfer-out function.

TRANS_IN

Used to enter the transfer-in function.

PRINTING

RCPT

Used to print the receipt after transaction.

RCPT_ON/OFF

Used to switch the receipt printing state (ON/OFF).

CUST_BILL

Customer bill printing

C. BILL

Used to enter the cumulated bill

E. BILL

Entertainment bill printing

G.C._RCPT

Bill on receipt

RCPT_SHIFT

Receipt shift, change print type

SORT_SHIFT

Temporary change sort group

Validation printing

BILL

Used to print the bill.

CHECK_PRINT

Check printing

CUSTOMER

Used for customer management.

CUST_CHARGE

Customer charge key

NAME& ADD

Used to enter name/address data.

ADVANCE_ORDER

Advance order key (customer ordering)

CREDIT_ORDER

Credit order key (customer ordering)

CORRECT_ORDER

Correct order key (customer ordering)

OTHER

AUTO

Auto key

AUTO nn

Auto key (nn: 2 - 99)

VIP

VIP_SALE n

VIP sales (n: 1 - 3)

POINT_REDEMP

Point redemption key

MASK

Mask key

BANK_CONSOLE

Bank console key

E-MAIL

E-mail key

DD MOP READ

DD mop read key

DD CORRECT

DD correct key

Summary of Contents for UP-3500

























































































































































































































































































































































Search results

Summary of Contents for UP-3500

Reviews:

Related manuals for UP-3500

Brands by name

Popular brands

Sharp UP-3500, Instruction Manual

Search results

Summary of Contents for UP-3500

Reviews:

Related manuals for UP-3500

Brands by name

Popular brands