Make sure your work area is cleared of uninvited people and obstacles every
time before you start operating the machine.
Never step or stand on the roller table. Your foot may slip or trip on the rollers
and you will fall.
Never wear gloves or loose clothing when operating the machine. It may lead
to serious injury if they are caught in the running machine. Wrap or cover
long hair.
Never touch the running saw blade with gloves or not. It is dangerous if your
hands, clothing or gloves are caught by the running blade.
Make sure any use of fire is prohibited in the shop and install a fire
extinguisher or other fire control device near the machine when cutting
titanium, magnesium, or any other material that produces flammable chips.
Never leave the machine unattended when cutting flammable materials.
Use a water-soluble cutting fluid on this machine. Oil-based cutting fluids
may emit smoke or catch fire, depending on how they are used.
Never cut carbon or any other material that may produce and disperse
explosive dust. It is possible that sparks from motors and other machine parts
will ignite and explode the air-borne dust.
Summary of Contents for SW-100H
