manualshive.com logo in svg

Sharp SL-6000L, Manual

Share
Download
Sharp SL-6000L Manual Download Page 102

100

Appendix

Note:

• 

When the power of the Zaurus is turned on at a temperature of under 25°C 
(77°F), without any peripheral devices (including the expansion memory 
card) connected, after the rechargeable battery (EA-BL09) is fully charged.

• 

Battery power is consumed even when the power of the Zaurus is turned off. 
A fully charged battery will become exhausted in about 14 days even if the 
Zaurus is not being used. Please recharge during this time.

Number of charging and discharging of the operating 
battery life

Approx. 500 times

Note:

The Battery life may vary depending on the usage.

Temperature range

For operation:

0°C to 40°C (32°F to 104°F)

For battery charging:

5°C to 35°C (41°F to 95°F)

Dimensions

 (when the sliding cover is closed)

Excluding the display protection cover (excluding protruding parts)
Approx. 79.8 (W) × 158 (D) × 20.4 (H) mm
Approx. 3.2 (W) × 6.2 (D) × 0.8 (H) inches

Including the display protection cover (excluding protruding parts)
Approx. 79.8 (W) × 158 (D) × 23 (H) mm
Approx. 3.2 (W) × 6.2 (D) × 0.9 (H) inches

Weight

SL-6000L
Excluding the display protection cover: Approx. 262g (9.3 oz)
Including the display protection cover: Approx. 284g (10.0 oz)
SL6000N
Excluding the display protection cover: Approx. 255g (9.0 oz)
Including the display protection cover: Approx. 277g (9.8 oz)

Docking Station

Connector used:

 USB, SHARP I/O PORT

Dimensions:

 

Approx. 96 (W) × 106 (D) × 101 (H) mm
Approx. 3.8 (W) × 4.2 (D) × 4.0 (H) inches

Weight:

 

Approx. 135 g (4.8 oz) 

Cable length:

 

Approx. 1.3±0.1 m (4.27±0.33 ft) 

Summary of Contents for SL-6000L












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands