Sharp SL-6000L, Manual

Page: 100 / 107

98
Appendix
I have set a scheduled alarm but the alarm does not make a sound.
• When an optional headphone is inserted into the stereo headphone jack, alarm
sounds will be heard through the headphone.
• You might have set the sound volume to off. Tap the Sound volume icon on the
taskbar. Turn the “Mute” checkbox off, adjust the slider, and turn the “Alarms”
checkbox on (see page 74).
• You might have selected “Silent” when you set the schedule alarm. When “Silent”
was selected, a display will appear on the screen but the alarm will not produce a
sound (See the Operation Manual on the CD-ROM: “Calendar”).
The CF or SD/MMC card is not being recognized properly.
The CF or SD card icon does not appear on the taskbar.
• Turn the power off and on again.
• See page 76 and be sure to remove the card and insert it again correctly.
• Only use memory cards that have been appproved by SHARP. Ohter cards may
not work properly with the unit.
The CF or SD card icon does not disappear from the taskbar by
tapping the icon and the tapping “Eject card” (or “Eject SD-card”).
• The operation (“Eject card” or “Eject SD-card”) is not valid if any files on a memory
card are opened, if a card is selected as the storage in the EMail application, or if
a modem card is in use and so on. In such cases, please eject the card after
closing all applications and turning off the Zaurus.
IR communication is not possible.
• Is the mutual distance correct (See the Operation Manual on the CD-ROM: “Beam
Receive”)?
• Are the IR communication ports on both units (transmitting and receiving ports)
aligned straight?
• Is data being sent from the sending unit after the receiving mode has been
entered on the receiving unit?
Not sure what accessories and peripherals can be used with this
Zaurus.
• For information regarding accessories and peripherals, visit our Web site (see
page 101).