32 of 33
and tested so as not to exceed the limits for exposure to
electromagnetic fields as required by the FCC.
These limits are part of comprehensive guidelines developed
by independent scientific organizations. The guidelines
include a substantial safety margin designed to assure the
safety of the phone user and others and to take into account
variations in age and health, individual sensitivities and
environmental conditions. The exposure standards provide
for the amount of radio frequency electromagnetic energy
absorbed by the body when using a mobile phone to be
measured by reference to the Specific Absorption Rate
(SAR). The SAR limit for the general public is currently 1.6
W/kg averaged over 1 grams of body tissue. Your Sharp
mobile phone SAR value is 1.41 W/kg. This has been tested
to ensure that this limit is not exceeded even when the phone
is operating at its highest certified power. In use however
your Sharp mobile phone may operate at less than full power
because it is designed to use only sufficient power to
communicate with the network.
20.11 FCC NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. While there may be differences between
the SAR levels of various phones and at various positions,
they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching
on FCC ID APYNAR0072.
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a
minimum distance of 1.5 centimeters between the radiator
and your body.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
Summary of Contents for SE-02
Page 1: ...1 of 33 SE 02 User Manual ...
