Sharp R-899P, User Manual

Page: 8 / 33

E – 7
Step Procedure
1
Press the CLOCK SET pad twice
2
Press the START pad.
The power will be off and the display will
show nothing.
Step Procedure
1
Press the CLOCK SET pad once.
2
Enter the hours by rotating the KNOB
to 11.
3
Press the CLOCK SET pad once to
change from hours to minutes.
4
Enter the minutes by rotating the KNOB
to 1134.
5
Press the CLOCK SET pad again.
This is a 12-hour clock. If the clock is set, when
cooking is complete, the display will show the
correct time of day. If the clock has not been set,
the display will only show “.0” when cooking is
complete.
If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open the door. The display will show:
ENERGY SAVE MODE TO CANCEL ENERGY SAVE
MODE SET THE CLOCK. If this occurs during cooking,
the programme will be erased. The time of day will
also be erased.
The clock of the oven works based on the frequency
of power source.
If you set the clock (Clock Set Mode), Energy Save
Mode does not work.
* To enter the present time of day 11:34 (AM or PM).
Clock Set Mode (Clock Setting)
Energy Save Mode
Your oven has an Energy Save Mode. In Energy
Save Mode approximately 0.1 watt is used, when
blank shows on the digital display. While in Clock
Set Mode approximately 3 watt is used as the time
will be shown. The Display in Clock Set Mode or
Energy Save Mode under different conditions is
listed below for your reference.
In Energy Save Mode, if you do not operate the
oven for 3 minutes or more (i.e. closing the door,
pressing the
STOP/CLEAR pad, or at the end of
cooking), the display will be blank and the oven
cannot be used. To restore power on, open and
then close the door, “. 0” will be displayed and the
oven is ready for use.
If you set the clock, Energy Save Mode will be
cancelled.
To start Energy Save Mode manually, follow the
instructions below.
* To start the Energy Save Mode (the display
shows the time of day).
So it may gain or lose in some area where the
frequency varies.
It is recommended that you should adjust the time
occasionally.
If you wish to know the time of day during the
cooking mode, press the CLOCK SET pad. As long as
your fi nger is pressed the CLOCK SET pad, the time
of day will be displayed.
The Display in Clock Set Mode or Energy Save Mode
Condition
Mode
No cooking or no operating
(Except Child Lock, Demo)
Energy Save Mode
Child Lock Setting
Auto Start setting
Demostration Mode setting
Power Interruption
Current time
Current time
“. 0” or Blank (without operating over 3 minutes)
“. 0”
(Lock will be displayed by pressing a pad each time.)
Setting time Auto Start can't be set in Energy Save Mode.
DEMO MICROWAVE OVEN
Blank
Clock Set Mode
x 2
R-899P [EN].indd Sec1:7 R-899P [EN].indd Sec1:7 8/13/09 2:36:39 PM 8/13/09 2:36:39 PM