7
Website:
http://www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)
BEFORE OPERATION
SETTING THE CLOCK
Plug in the oven.
1. The oven display will flash:
2. Press the
STOP/CLEAR
button.
3. The display will show:
To set the clock, see below.
1.
2.
3.
x1
1. To set the 12 hour clock, press the
POWER LEVEL
button once and
hold for 3 seconds, will appear in the display.
2. To set the 24 hour clock, press the
POWER LEVEL
button once
more after step 1,
will appear in the display.
2. To enter the hours rotate the
TIME/WEIGHT
knob
clockwise/counter-clockwise
until 23 is displayed.
Check the display.
Example:
To set the 24 hour clock to 23:35
4. To enter the minutes rotate the
TIME/WEIGHT
knob
clockwise until 35 is displayed.
3. To change from hours to
minutes press the
POWER LEVEL
button
once.
5. To start the clock press
the
POWER LEVEL
button once.
x1
and hold for
3 seconds.
There are two setting modes: 12 hour clock and 24 hour clock.
x1
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has
not been set, the display will only show
when cooking is complete.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show:
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time
of day will also be erased.
• When you want to reset the time of day, follow the above example again.
x1 and hold
for 3 seconds.
Select the 24
hour clock.
1. Select the clock
function.
x1
x1
R-24STM O/M + CkBk 5/4/01 8:39 am Page 7
