Sharp PN-V600 Operation Operation Manual Download Page 53

Page: 53 / 61

Troubleshooting

If you are experiencing any problem with your display, before

calling for service, please review the following troubleshooting

tips.

There is no picture or sound.

• Is the power cord disconnected? (See page 15.)

• Is the main power switch off? (See page 17.)

• Is the monitor in standby mode (the power LED illuminating

in orange)?

• Make sure correct input mode is selected. (See page 18.)

• If any external equipment is connected, make sure the

equipment is operating (playing back).

Remote control does not work.

• Are the batteries inserted with polarity (+,-) aligned? (See

page 15.)

• Are the batteries exhausted?

• Point the remote control unit toward the remote control

sensor.

• Is the menu display hidden or is operation disabled? (See

page 31.)

• Is the PN-ZR01 (optional) remote control sensor box

disconnected?

• If the main unit is connected to multiple monitors, is the

RS-232 cable disconnected? Has the ID No. been set?

Sound from left and right speakers is reversed.

Sound is heard from only one side.

• Are audio cables connected properly? (See pages 12 to

13.)

• Make sure audio cables for external speakers are

connected properly: left and right cables may be reversed

or one of the two cables may not be connected. (See page

13.)

• Check the setting of BALANCE for AUDIO menu. (See

page 24.)

There is a picture but no sound.

• Is the sound muted?

• Make sure the volume is not set to minimum.

• Are audio cables connected properly?

• Is the setting of AUDIO SELECT on the OPTION menu

correct? (See page 26.)

Unstable video.

• The signal may be incompatible.

• Try the automatic screen adjustment when the PC D-sub

input terminal or PC RGB input terminals are used.

The video from the PC/AV HDMI input terminal does not

appear properly.

• Is the setting for HDMI of INPUT SELECT on the OPTION

menu correct? (See page 26.)

• Is the HDMI cable HDMI standard compliant? The monitor

will not work with cables that are not standard compliant.

• Is the input signal compatible with this monitor? (See pages

57 to 58.)

The video from the PC/AV DVI-D input terminal does not

appear properly.

• Is the setting for DVI of INPUT SELECT on the OPTION

menu correct? (See page 26.)

• Is the input signal compatible with this monitor? (See pages

57 to 58.)

• Turn off the power to the connected equipment and then

turn the power on again.

• If the monitors are connected in a daisy chain, turn off the

power to all the monitors connected in a daisy chain and

then turn the power on again.

The video from PC RGB, AV COMPONENT, or AV VIDEO

does not appear correctly.

• Is the setting for BNC of INPUT SELECT on the OPTION

menu correct? (See page 26.)

• Is the input signal compatible with this monitor? (See pages

57 to 58.)

Control buttons do not work.

There is no picture.

• Load noises from outside may be interfering with normal

operation. Turn off the power and turn it on after waiting at

least 5 seconds, and then check the operation.

The input mode changes automatically.

• When the AUTO INPUT CHANGE is ON and no signal

is present in a selected input mode, the AUTO INPUT

CHANGE automatically changes the selected mode to a

mode where a video signal is present.

The input mode may change in the following cases:

- When a computer is in standby mode.

- When video play is stopped with a playback device.

Power LED flashes red.

“STATUS [xxxx]” appears in the corner of the screen.

• Hardware has a problem. Turn off the monitor and request

repair from your SHARP dealer.

(When STATUS ALERT is set to OSD & LED. This varies

depending on the setting.)

When “AUTO DIMMING” is displayed.

• When the internal temperature of the monitor rises

excessively, the brightness of the backlight automatically

decreases in order to prevent a further temperature rise. If
you attempt to use

to adjust the brightness while

the monitor is in this state, “AUTO DIMMING” is displayed

and you cannot change the brightness.

• Remove the cause of the excessive temperature rise.

The monitor makes a cracking sound.

• You may occasionally hear a cracking sound from the

monitor. This happens when the cabinet slightly expands

and contracts according to change in temperature. This

does not affect the monitor’s performance.

Summary of Contents for PN-V600 Operation






























































Search results

Summary of Contents for PN-V600 Operation

Reviews:

Related manuals for PN-V600 Operation

Brands by name

Popular brands

Sharp PN-V600 Operation, Operation Manual

Search results

Summary of Contents for PN-V600 Operation

Reviews:

Related manuals for PN-V600 Operation

Brands by name

Popular brands