Sharp PN-V600 Operation Operation Manual Download Page 48

Page: 48 / 61

■ INFORMATION

Information about this monitor appears.

■ CONTROL

You can control the operations corresponding to the buttons

(

POWER

INPUT

SIZE

) on the remote control unit. (See pages 18

and 19.)

TIPS

• In standby mode, Power ON is the only operation available.

■ ADJUSTMENT

You can adjust these settings which are also available on the

monitor’s menu.

• SCREEN (See page 23.)

• PICTURE (See page 23.)

• PICTURE (ADVANCED) (See page 30.)

• AUDIO (See page 24.)

• SETUP (See page 24.)

• OPTION (See page 26.)

• SCHEDULE (See page 29.)

• MULTI (See page 27.)

• PIP/PbyP (See page 27.)

• FUNCTION (See page 31.)

TIPS

• After changing DISPLAY COLOR PATTERN to OFF, click

[Refresh] to correctly retrieve the status of the monitor.

Controlling the Monitor with a PC (LAN)

Summary of Contents for PN-V600 Operation






























































Search results

Summary of Contents for PN-V600 Operation

Reviews:

Related manuals for PN-V600 Operation

Brands by name

Popular brands

Sharp PN-V600 Operation, Operation Manual

Search results

Summary of Contents for PN-V600 Operation

Reviews:

Related manuals for PN-V600 Operation

Brands by name

Popular brands