Sharp PN-L603W Operation Manual Download Page 9

Page: 9 / 70

Supplied Components

If any components are missing, please contact your dealer.



Liquid Crystal Display Monitor: 1



Remote control unit: 1



Power cord: 1



Remote control unit battery

(R-6 (“AA” size)): 2



Cable clamp: 3



Cable clamp (insertion type): 2



Touch pen adapter: 1

* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

* For environmental protection!

Do not dispose of batteries in household waste. Follow the disposal instructions for your area.



Wireless adapter: 1



Wireless token: 1



CD-ROM (Utility Disk): 1



CD-ROM (Touch Display Link): 1



Touch Display Link License: 1



Setup Manual: 1



Touch pen: 1



Pen tip (for touch pen): 2

System Requirements

Computer

PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080.

(CD-ROM drive required for software installation.)

Windows 7 (32-bit or 64-bit version),

Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),

Windows 10 (32-bit or 64-bit version)

CPU

Intel Celeron or AMD Sempron 1.6 GHz or faster

Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended

Memory

At least 2 GB

Free space on hard drive

At least 200 MB (free space separately required for data storage)

To use a touch panel with a computer connected to the video input terminal on this monitor, the touch panel and computer must

be connected, and Touch Panel Settings Tool, Touch Pen Utility, and Pen Software must be installed on the computer from the

supplied CD-ROM.

When the Touch Display Downloader is installed, you can check and download the most recent versions of the software

programs.

To use a touch panel with a computer connected to the bottom, connect to the USB 1 port.

To use a touch panel with a computer connected to the side, connect to the USB 2 port.

(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)

Download the setup program for the Touch Viewer with the Touch Display Downloader.

To display a computer screen on the monitor by wireless, use MirrorOp for SHARP and the built-in Wireless controller.

In Wireless mode, a touch panel can be used even with a computer that does not have Touch Panel Settings Tool or Touch Pen

Utility installed.

To install and use the software, see the manual for each.



Touch pen battery

(LR-03 (“AAA” size)): 1



Tray: 1



USB cable: 1



Eraser: 1



Camera mount: 1



Camera screw (inch thread): 1



Touch pen adapter screw (Step screw, M3): 1



Tray mounting screws (M3) : 5



Wireless adapter cover: 1



RS-232C conversion cable (3.5mm mini jack): 1



Cover SHARP logo: 1

Place this sticker onto the SHARP logo to cover

the logo.

Summary of Contents for PN-L603W







































































Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands

Sharp PN-L603W, Operation Manual

Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands