Sharp PN-L603W Operation Manual Download Page 53

Page: 53 / 70

Your monitor can be connected to a LAN allowing you to

control it from a computer on the LAN.

You can also configure the monitor to send e-mail notification

when it has a problem.

The connection requires a commercially available LAN cable

(UTP cable, Category 5, straight through).

Hub

LAN terminal

LAN cable (commercially available, straight)

Network (LAN)

TIPS

• You must assign an IP address to the monitor by following

the procedures in “Settings to connect to a LAN”. (See the

description on the right.)

• Your computer must be installed with the web browser.

• When POWER SAVE MODE is set to ON, control is not

possible in standby mode.

• To control the monitor via LAN, set RS-232C/LAN SELECT

to LAN. (See page 34.)

• You cannot use RS-232C and LAN control simultaneously.

Initializing personal information

• Personal information such as e-mail addresses can be

registered in the monitor. Before transferring or disposing

of the monitor, initialize all settings by selecting ALL RESET

1. (See page 41.) Note that ALL RESET 2 will not initialize

e-mail addresses and other settings.

Controlling the Monitor with a computer (LAN)

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the

settings of your LAN.

These settings can be made on either the monitor or a

computer connected to the monitor.

The settings depend on the configuration of your LAN. Ask

your LAN administrator for details.

■ To set on the monitor

Set RS-232C/LAN SELECT of COMMUNICATION SETTING

on the SETUP menu to LAN, and then set the LAN SETUP

options. (See page 34.)
After setting each item, select SET and press

ENTER

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

Press

to select items, and press

change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

Press

to select items, and press

change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default

gateway.

If you are not using a gateway, specify “0.0.0.0”.

Press

to select items, and press

change the values.

RESET

Resets the values of the LAN settings to the factory preset

values.
Select ON and then press

ENTER

Summary of Contents for PN-L603W







































































Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands

Sharp PN-L603W, Operation Manual

Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands