Sharp PN-L603W Operation Manual Download Page 12

Page: 12 / 70

Connecting Peripheral Equipment

10 9

11 12 15

17
18

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

• When using a touch panel with a computer connected to the

video input terminal on this monitor, connect the USB cable

to the computer. For details, see the Touch Panel Settings

Tool Operation Manual.

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a computer

screen is displayed for the first time using D-SUB1 or

D-SUB2, or when the setting of the computer is changed.

The screen is adjusted automatically when SELF ADJUST

in the MONITOR menu is set to ON.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the monitor

may appear delayed from the audio portion.

Audio should be played through this monitor by connecting the

playback device to the monitor’s audio input, and connecting

the monitor’s audio output to the speakers or other devices.

• The audio input terminals used in each input mode are

factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

D-SUB1

Audio 1 input terminal

D-SUB2

Audio 2 input terminal

DisplayPort

DisplayPort input terminal

HDMI1

HDMI 1 input terminal

HDMI2

HDMI 2 input terminal

HDMI3

HDMI 3 input terminal

Direct Drawing

Audio 1 input terminal

Wireless

It is convenient to use the terminals for separate purposes;

For example, using the terminal on the bottom of the monitor

to connect a fixed computer and using the terminal on the side

of the monitor to connect a mobile computer.

HDMI 1 input terminal

2. HDMI 2 input terminal

3. HDMI 3 input terminal

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• Set HDMI1/HDMI2/HDMI3 of INPUT SELECT on the

SETUP menu according to the device to be connected.

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When HDMI is selected, connection to the audio input

terminal is unnecessary.

4. DisplayPort input terminal

• Use a commercially available DisplayPort cable

(conforming to the DisplayPort standard).

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When DisplayPort is selected, connection to the audio

input terminal is unnecessary.

5. D-sub 1 input terminal

• Set D-SUB1 of INPUT SELECT on the SETUP menu

according to the device to be connected.

• To use with D-SUB1[VIDEO], connect the green terminal

to the device’s video output.

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

6. D-sub 2 input terminal

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

Summary of Contents for PN-L603W







































































Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands

Sharp PN-L603W, Operation Manual

Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands