Sharp PN-L603W Operation Manual Download Page 58

Page: 58 / 70

■ NETWORK (GENERAL)

This screen allows you to specify the general LAN settings.

MONITOR NAME

Specify a name for this monitor as it should appear on the

web browser screen.

AUTO LOGOUT TIME

Specify the time (in minutes) to elapse before automatically

disconnecting this monitor from the network.

Specify in minutes from 1 to 65535. A value of ‘0’ will disable

this function.

DATA PORT

Specify the TCP port number to use for exchanging data with

the monitor.

Specify a value from 1025 to 65535.

SEARCH PORT

Specify the port number to use when searching for this

monitor.

Specify a value from 1025 to 65535.

INSTALLATION INFORMATION (NAME/LOCATION)

Specify the information to display for this monitor in the web

browser window.

LINK MODE

Selects the link speed and duplex.

Use AUTO normally.

TIPS

• The MONITOR NAME can be up to 16 alphanumeric

characters or symbols.

• Enter up to 50 characters in the NAME field in the

INSTALLATION INFORMATION.

• Enter up to 100 characters in the LOCATION field in the

INSTALLATION INFORMATION.

■ MAIL (ORIGINATOR)

This screen allows you to configure the e-mail sent periodically

or when the monitor has an error.

The settings depend on the configuration of your LAN. Ask

your LAN administrator for details.

SMTP SERVER

Specify the SMTP server address for sending e-mail.

* When using a domain name, make sure to specify the

DNS SERVER

as well. (See page 57.)

SMTP PORT

If the “AUTHENTICATION” is “SMTP-AUTH”, specify the port

number.

ORIGINATOR E-MAIL ADDRESS

Specify the e-mail address for this monitor.

This address becomes the e-mail address of the originator.

ORIGINATOR NAME

Specify the name for the originator.

This name appears in the “Originator Name” field of the

e-mail.

AUTHENTICATION

Specify the authentication method to use when sending

e-mail.

POP SERVER

If the “AUTHENTICATION” method is “POP before SMTP”,

specify the POP server address.

ACCOUNT NAME / PASSWORD

If the “AUTHENTICATION” is “POP before SMTP” or “SMTP-

AUTH”, specify the account name and password to connect

to the SMTP server.

TIPS

• You can enter up to 64 alphanumeric characters or symbols

for the ORIGINATOR E-MAIL ADDRESS, ORIGINATOR

NAME, ACCOUNT NAME, and PASSWORD.

• The SMTP SERVER and POP SERVER can be up to 64

characters.

The following characters can be used: a-z, A-Z, 0-9, - , .

Controlling the Monitor with a computer (LAN)

Summary of Contents for PN-L603W







































































Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands

Sharp PN-L603W, Operation Manual

Search results

Summary of Contents for PN-L603W

Reviews:

Related manuals for PN-L603W

Brands by name

Popular brands