Sharp PN-L603W, Operation Manual

Page: 46 / 70

46
E
Controlling the Monitor with a PC (RS-232C)
SCREEN menu
Function Command Direction Parameter Reply Control/Response contents *
AUTO ASNC W 1 When the input mode is D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
-
CLOCK CLCK WR 0-1200 0-1200 When the input mode is D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
Varies depending on the signal.
PHASE PHSE WR 0-63 0-63 When the input mode is D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
POSITIONING POSITION OF
THE LONGEST
DIRECTION
HPOS WR 0-100 0-100 0-800 on D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
Varies depending on the signal.
POSITION OF
THE SHORTEST
DIRECTION
VPOS WR 0-100 0-100 0-200 on D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
Varies depending on the signal.
SIZE SIZE OF THE
LONGEST
DIRECTION
HSIZ WR 0-100 0-100
SIZE OF THE
SHORTEST
DIRECTION
VSIZ WR 0-100 0-100
RESOLUTION LONGEST
DIRECTION
RESOLUTION
HRES WR 300-1920 300-1920 When the input mode is D-SUB1[RGB], D-SUB2, Direct Drawing, Wireless.
Only even numbers are valid for parameters.
Varies depending on the signal.
SHORTEST
DIRECTION
RESOLUTION
VRES WR 200-1200 200-1200
RESET ARST W 1
PICTURE menu
Function Command Direction Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
○
CONTRAST CONT WR 0-60 0-60
BLACK LEVEL BLVL WR 0-60 0-60
TINT TINT WR 0-60 0-60
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
COLOR
ADJUSTMENT
COLOR MODE BMOD WR 0 0 STD
2 2 VIVID
3 3 sRGB (When the input mode is PC)
4 4 HIGH ILLUMINANCE
WHITE
BALANCE
THRU CTMP WR 0 0 PC input
PRESET 1-28 1-28 From 1: approximately 3,000K to 15: approximately 10,000K (500K steps)
16: approximately 5,600K, 17: approximately 9,300K, 18: approximately 3,200K
From 19: approximately 10,500K to 28: approximately 15,000K (500K steps)
USER 99 99
R-CONTRAST CRTR WR 0-256 0-256 “ERR” when CTMP is not set to 99.
G-CONTRAST CRTG WR 0-256 0-256
B-CONTRAST CRTB WR 0-256 0-256
R-OFFSET OFSR WR -127-127 -127-127
G-OFFSET OFSG WR -127-127 -127-127
B-OFFSET OFSB WR -127-127 -127-127
COPY TO USER CPTU W 0 Copies a preset value to the user setting. -
GAMMA GAMM WR 0-2 0-2 0: 1.8, 1: 2.2, 2: 2.4 (during PC input)
0: LIGHT 2, 2: DARK (during AV input)
○
4-6 4-6 4: USER, 5: 2.0, 6: STD (during PC input)
4: USER, 5: LIGHT 1, 6: STD (during AV input)
FLESH TONE (AV input) FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
C.M.S.-HUE (AV input)
CMHR WR -10-10 -10-10 R “ERR” when other than OFF is selected for FLESH TONE.
CMHY Y “ERR” when other than OFF is selected for FLESH TONE.
CMHG G “ERR” when other than OFF is selected for FLESH TONE.
CMHC C “ERR” when other than OFF is selected for FLESH TONE.
CMHB B “ERR” when other than OFF is selected for FLESH TONE.
CMHM M “ERR” when other than OFF is selected for FLESH TONE.
CRST W 1 Resets the hue. “ERR” when other than OFF is selected for FLESH TONE.
C.M.S.-SATURATION
(AV input)
CMSR WR -10-10 -10-10 R “ERR” when other than OFF is selected for FLESH TONE.
CMSY Y “ERR” when other than OFF is selected for FLESH TONE.
CMSG G “ERR” when other than OFF is selected for FLESH TONE.
CMSC C “ERR” when other than OFF is selected for FLESH TONE.
CMSB B “ERR” when other than OFF is selected for FLESH TONE.
CMSM M “ERR” when other than OFF is selected for FLESH TONE.
CRST W 2 Resets the saturation. “ERR” when other than OFF is selected for FLESH TONE.
C.M.S.-VALUE (AV input)
CMVR WR -10-10 -10-10 R “ERR” when other than OFF is selected for FLESH TONE.
CMVY Y “ERR” when other than OFF is selected for FLESH TONE.
CMVG G “ERR” when other than OFF is selected for FLESH TONE.
CMVC C “ERR” when other than OFF is selected for FLESH TONE.
CMVB B “ERR” when other than OFF is selected for FLESH TONE.
CMVM M “ERR” when other than OFF is selected for FLESH TONE.
CRST W 3 Resets the brightness. “ERR” when other than OFF is selected for FLESH TONE.