Sharp PN-L501C Operation Manual Download Page 9

Page: 9 / 49

Supplied Components

If any component should be missing, please contact your dealer.

System Requirements

Computer

PC/AT compatible computer able to output a resolution of 1920 x 1080.

(CD-ROM drive required for software installation.)

Operating system

Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),

Windows 10 (32-bit or 64-bit version)

CPU

Intel Celeron B810E 1.6 GHz or faster

Intel Core i7-3517UE 1.7 GHz or faster recommended

Memory

At least 2 GB

Free space on hard drive At least 5 GB (free space separately required for data storage)

To use the touch panel, connect the USB cable (supplied) to your computer.

Pen Software can be installed from the supplied CD-ROM.

When the Information Display Downloader is installed, you can check and download the most recent versions of the software

programs.

To install and use the software, see the manual for each.

Download the setup program for the SHARP Display Connect and Touch Viewer with the Information Display Downloader.



Liquid Crystal Display Monitor: 1



Remote control unit: 1



Cable clamp: 3



Power cord: 1



Remote control unit battery

(LR03 (“AAA” size)): 2



CD-ROM (Utility Disk): 1



SHARP Display Connect License: 1



Setup Manual: 1



Touch pen: 1



Tray: 1



Tray mounting screw/

camera mount screw (M3) : 2 each



USB cable: 1



Camera mount: 1



Camera screw (inch thread): 1



Logo sticker: 1



Vertical sticker (Operation panel): 1

* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

* For environmental protection!

Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Summary of Contents for PN-L501C


















































Search results

Summary of Contents for PN-L501C

Reviews:

Related manuals for PN-L501C

Brands by name

Popular brands

Sharp PN-L501C, Operation Manual

Search results

Summary of Contents for PN-L501C

Reviews:

Related manuals for PN-L501C

Brands by name

Popular brands