Sharp PN-H701 Operation Manual Download

Page: 17 / 60

Caution

• Turn on the monitor first before turning on the PC or

playback device.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When turning the power off and back on, always wait for at

least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on/off

Press the POWER button or POWER switch to turn the power

ON/OFF.

Power switch

Power LED

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

It is possible to check the power LED even when the operation

panel is stored inside the monitor.

Power LED

Caution

• When turning the power off and back on, always wait for at

least 5 seconds. A short interval may result in a malfunction.

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

Disabling power on/off operations

Power on/power off operations can be disabled in order to

protect the monitor from an accidental power off. Set the

POWER BUTTON LOCK in FUNCTION menu. (See page 30.)

Summary of Contents for PN-H701





























































Search results

Summary of Contents for PN-H701

Reviews:

Related manuals for PN-H701

Brands by name

Popular brands

Sharp PN-H701, Operation Manual

Search results

Summary of Contents for PN-H701

Reviews:

Related manuals for PN-H701

Brands by name

Popular brands