Sharp PN-H701, Operation Manual

Page: 29 / 60

29
E
Menu Items
Character input
For items that require entry of text, press
ENTER
to display the
software keyboard.
Select a character with
, and press
ENTER
to
enter.
• To change the characters entered, select CHAR. SET or
press
DISPLAY
(F1).
• To switch between upper case and lower case, select
CAPS and press
ENTER
.
• To delete characters, select CLEAR or DELETE and press
ENTER
. You can also perform DELETE by pressing
MODE
(F2).
• When you are done entering characters, select DONE and
press ENTER .
You can also finish by pressing
SIZE
(F3).
To cancel character entry, select CANCEL and press
ENTER
.
Adjustments for PC screen display
n
Automatic adjustment
When you use the PC D-sub to display a PC screen, or when
you change the setting of the PC, use the automatic screen
adjustment.
1. Switch the input to D-SUB and display the adjustment
pattern.
(See the description below.)
2. Press
MENU
and select AUTO SYNC. of SCREEN POSITION
of INPUT SELECT in the SETUP menu. (See page 27.)
3. Press
ENTER
and select YES.
4. Press
ENTER
.
Wait until automatic adjustment finishes.
5. Press MENU to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
• When the input signal is 1024 x 768 or 1366 x 768, the
input resolution must be set manually. Select the resolution
with INPUT SIGNAL in SCREEN POSITION of INPUT
SELECT in the SETUP menu. (See page 27.)
n
Screen display for adjustment
Before making adjustments in the SCREEN POSITION menu
or PICTURE menu, display an image to brighten the entire
screen. If you are using a Windows PC, use the adjustment
pattern on the supplied CD-ROM.
Opening the adjustment pattern
The following example is performed in Windows 7.
1. Load the supplied CD-ROM into the computer’s CD-
ROM drive.
2. Open [CD Drive] in [Computer].
3. Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is finished, press the [Esc] on the
computer’s keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• If the display mode on the computer you are using is
65,000 colors, the color levels in the color pattern may
appear differently or grayscale may appear to be colored.
(This is due to the specifications of the input signal and is
not a malfunction.)