background image

6

E

 1)  Read these instructions.

 2)  Keep these instructions.

 3)  Heed all warnings.

 4)  Follow all instructions.

 5)  Do not use this apparatus near water.

 6)  Clean only with dry cloth.

 7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

 8)   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

 9)   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider 

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet.

 10)   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where 

they exit from the apparatus.

 11)   Only use attachments/accessories specified by the manufacturer.

 12)   Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

 13)   Unplug this apparatus during lightning storms or when unused for long periods of time.

 14)   Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for PN-H701





























































Reviews: