manualshive.com logo in svg

Sharp MX-M550N, Operation Manual, Page: 172 / 200

Share
Download
Sharp MX-M550N Operation Manual Download Page 172

CALLING UP AND USING A FILE

7-14

7

The results of the user name search
appear. Touch the desired file name or
folder name.

●

See page 7-5 for a list of the document filing
icons.

●

When a file name is touched, the operation
selection screen appears. 

(To perform an

operation using the file, go to step 5 on
page 7-16.)

●

When a folder name is touched, all files in the
folder are displayed. Touch the desired file.

(To perform an operation using the file, go
to step 5 on page 7-16.)

●

To change the order of file display, touch the
[FILE OR FOLDER NAME] key, [USER
NAME] key, or [DATE] key.
If you touch a file name or folder name that
has a password, a password entry screen will
appear. Enter the 5-digit password with the
numeric keys.

[Searching by file or folder name]

8

Touch the [FILE OR FOLDER NAME] key.

A character entry screen
appears. Enter the file
name or folder name to
be used for the search.
See page 7-29 to enter
characters. 

9

Touch the [START SEARCH] key.

10

The results of the file or folder name
search appear. Touch the desired file
name or folder name.

●

See page 7-5 for a list of the document filing
icons.

●

When a file name is touched, the operation
selection screen appears. 

(To perform an

operation using the file, go to step 5 on
page 7-16.)

●

When a folder name is touched, all files in the
folder are displayed. Touch the desired file.

(To perform an operation using the file, go
to step 5 on page 7-16.)

●

To change the order of file display, touch the
[FILE OR FOLDER NAME] key, [USER
NAME] key, or [DATE] key.
If you touch a file name or folder name that
has a password, a password entry screen will
appear. Enter the 5-digit password with the
numeric keys.

SEARCH

FILE OR FOLDER NAME

USER NAME

AAA

AAA

AAA

Product SpecA

Product B

Product 2

2003/10/20

2003/10/20

2003/10/20

SEARCH AGAIN

CANCEL

DATE

USER NAME

FILE OR FOLDER NAME

CANCEL

START SEARCH

SEARCH

FILE OR FOLDER NAME

USER NAME

SEARCH AGAIN

CANCEL

DATE

Yamada

Sato

Akata

Product specifications

Products

Product_info

2002/12/30

2002/12/30

Summary of Contents for MX-M550N









































































































































































































Reviews:

No comments