5-4
TRANSMITTING METADATA
Follow the steps below to select a metadata set, enter each item, and perform metadata transmission.
1
Touch the [DATA ENTRY] key.
2
Touch the key of the metadata that you
wish to use.
3
Touch the [OK] key.
4
The keys of the items stored in the
metadata set will appear. Touch the key of
the item that you wish to enter.
5
Touch the key of the value that you wish to
enter.
●
If the entry values of the metadata item were stored
in selection format, the selections will appear as
keys. If a value is editable, the [DIRECT ENTRY]
key can be touched to manually enter a value.
●
If a metadata item requires the entry of text, a text
entry screen will appear. Enter the required
information.
6
Touch the [OK] key.
7
Enter all items.
NOTE
If no metadata sets have been stored, the [DATA
ENTRY] key cannot be selected. Store a metadata
set in the Web pages and then perform the
transmission procedure.
NOTE
If you selected the wrong metadata set, touch the
[METADATA SET] key and return to the screen of
step 3. Metadata items entered to that point will not
longer be effective.
ADDRE
SCAN
SPECIA
ADDRESS
FI
ADDRESS ENTRY
DATA ENTRY
MODE SWITCH
OK
METADATA 2
METADATA 4
METADATA 6
METADATA 8
1/2
CANCEL
OK
ADATA 2
ADATA 4
ADATA 6
ADATA 8
1/2
CANCEL
READY TO SEND
.
(METADATA SEND MODE)
DATA ENTRY
User ID
Pass Code
Bill Code
METADATA SET
NOTES
●
To change the number of items that appear at
once, touch the display item number select key.
Each time the key is touched, the number of items
displayed switches between 3 and 6.
●
For information on entering text, see page 7-29 of
the operation manual (for general information and
copier operation).
OK
Value2
Value4
Value6
1/9
CANCEL
DIRECT ENTRY
3
6
OK
Value2
Value4
Value6
1/9
CANCEL
DIRECT ENTRY
3
6
READY TO SEND
.
(METADATA SEND MODE)
DATA ENTRY
User ID
Pass Code
Bill Code
Value2
xxxxxx
xxxxxx
METADATA SET
