MX-FN10 DISASSEMBLY AND ASSEMBLY 6 – 6
2)
Remove the interface cable facing part.
Remove the gear box fixing screw.
3)
Remove the gear box.
(5) Transport motor assembly
1)
Remove the rear cabinet upper. (See A-(5).)
2)
Remove the screw, and remove the transport motor assembly.
(6) Load tray lift motor gear box
1)
Remove the rear cabinet upper. (See A-(5).)
2)
Remove the saddle finisher control PWB fixing part. (See C-
(2).)
3)
Remove the gear box.
C. PWB section
(1) Saddle finisher control PWB
1)
Remove the rear cabinet upper. (See A-(5).)
2)
Remove the PWB fixing screw, and disconnect each connec-
tor, release the PWB holding pawl, and remove the PWB.
Summary of Contents for MX-FN10
Page 52: ...Memo ...
Page 53: ...Memo ...
