MX-FN10 DISASSEMBLY AND ASSEMBLY 6 – 5
3)
Remove the stapler fixing screws (3 positions).
4)
Remove the stapler.
(3) Edge binding stapler removal
1)
Slide the stapler to the front.
2)
Remove the latch for connection of the main unit.
3)
Remove two stapler fixing screws from the hole in circle in the
figure below.
At that time, shift the stapler and fit the screw with the hole
position.
4)
Remove the stapler.
(4) Saddle pushing plate motor gear box removal
1)
Remove the grip, the E-ring, and the bearing which are fixing
each gear shaft.
Summary of Contents for MX-FN10
Page 52: ...Memo ...
Page 53: ...Memo ...
