manualshive.com logo in svg

Sharp MX-4100N, Operation Manual, Page: 864 / 903

Share
Download
Sharp MX-4100N Operation Manual Download Page 864

31

This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer 
driver settings.

☞

MAC OS X: this page 
(v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.1)

☞

MAC OS 9.0 - 9.2.2: page 36

MAC OS X

1

Insert the "Software CD-ROM" into your 
computer's CD-ROM drive.

Insert the "Software CD-ROM" that shows "Disc 2" on the 
front of the CD-ROM.

2

Double-click the [CD-ROM] icon (

) on 

the desktop.

3

Double-click the [MacOSX] folder.

Before installing the software, be sure to read "ReadMe 
First". "ReadMe First" is in the [US-English] folder 
([English] folder in areas other than the U.S.) in the 
[Readme] folder.

4

Double-click the folder corresponding 
to the versions of the operating system.

5

Double-click the [MX-PBX1] icon (

).

6

Click the [Continue] button.

3

SETUP IN A MACINTOSH 
ENVIRONMENT

• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In addition, the 

machine must be connected to a network. A USB connection cannot be used.

• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.

The explanations of screens and procedures are primarily for Mac OS X v10.4. The screens may vary in other versions of the 
operating system.

v10.3.9

v10.5 - 
10.5.1

v10.4.11

v10.2.8

If the "Authenticate" window appears in Mac OS X 
v10.2.8, enter the password and click the [OK] button.

!mx4100_us_ins.book  31 ページ  ２００８年７月２９日　火曜日　午後５時１４分

Summary of Contents for MX-4100N








































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments