Sharp MX-4100N, Operation Manual, Page: 706 / 903

7-34
SYSTEM SETTINGS
Contents
* When a saddle stitch finisher is installed.
Network Settings
X
Erase Width Adjustment
7-69
‹
Edge Clearance Width 1/2"
‹
Center Clearance Width 1/2"
X
Card Shot Settings
7-69
‹
Original Size X: 3-3/8", Y: 2-1/8"
‹
Fit to Page Disabled
X
Automatic Saddle Stitch * Enabled 7-69
X
Initial Tab Copy Setting 1/2" 7-69
X
Disabling Deletion of Job Programs Disabled 7-70
X
Disabling of Bypass-Tray in Duplex Copy Disabled 7-70
X
Disabling of Auto Paper Selection Disabled 7-70
X
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-70
X
B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-70
X
B/W Quick Scan from Document Glass Enabled 7-70
●
Color Adjustments 7-71
X
Initial Color Balance Setting Factory default state 7-71
X
Auto Color Calibration – 7-71
Item Factory default setting Page
■
Network Settings
7-72
●
IPv4 Settings DHCP 7-72
●
IPv6 Settings Disabled 7-72
●
Enable TCP/IP Enabled 7-72
●
Enable NetWare Enabled 7-72
●
Enable EtherTalk Enabled 7-72
●
Enable NetBEUI Enabled 7-72
●
Reset the NIC – 7-72
●
Ping Command – 7-72
Item Factory default setting Page