Home
/
Sharp
/
MX-4100N
/
Operation Manual

Sharp MX-4100N, Operation Manual, Page: 140 / 903

Share

Page: 140 / 903

Sharp MX-4100N Operation Manual Download Page 140

2-19

3

Select the 2-sided copy mode.

(1) Touch the [1-Sided to 2-Sided] key.

(2) Touch the [OK] key.

The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.

4

Check the paper to be used and the
color mode.

Make sure that the desired paper (tray) and color mode are
selected.

• To change the paper (tray), touch the [Paper Select] key.

☞

• To change the color mode, touch the [Color Mode] key.

☞

COPY COLOR MODES

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.

5

Set the number of copies (number of
sets) with the numeric keys.

• Up to 999 copies (sets) can be set.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key (

) and then enter the correct number.

6

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Scanning begins.

7

Remove the original and place the next original, and then press the [COLOR
START] key or the [BLACK & WHITE START] key.

Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.

OK

2

-

Sided Copy

Binding

Change

(1)

(2)

11x17

8

½

x11

8

½

x11R

Auto

8

½

x11

Plain

8

½

x14

8

½

x11

8

½

x11

Color

Mode

Special

Modes

Plain

2

-

Sided

Copy

Output

File

Quick

File

Copy

Ratio

100

%

3.

2.

1.

Original

Paper

Select

Auto

Full

Color

Exposure

Auto

4.

Preview

Plain

7

8

½

11

Special

Modes

2

-

Sided

Copy

«
...
138
139
140
141
142
...
»

Summary of Contents for MX-4100N








































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments