Sharp MX-4100N Operation Manual Download Page 115

Page: 115 / 903

1-74

BEFORE USING THE MACHINE

Contents

Push the waste toner box into the
machine.

Push the box in until it clicks into place.

Close the front cover.

Caution

•

Do not throw the waste toner box into a fire. Toner may fly and cause burns.

•

Store the waste toner box out of the reach of small children.

When replacing the waste toner box, be aware that it may soil your clothes or the immediate surroundings.

Summary of Contents for MX-4100N








































































































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-4100N, Operation Manual, Page: 115 / 903

Search results

Summary of Contents for MX-4100N

Reviews: