MX-2310U MX-FN17 (FINISHER) 6 – 4
10) Insert the open/close cover into the fulcrum shaft, and fix it with
the clip.
11) Attach the fulcrum cover and fix it with the screw (M3 x 6 S
tight, with flange).
12) Attach the protection sheet to the bottom of the operation
panel.
D. External fitting attachment
1)
Remove the left cabinet upper rear from the left cabinet upper.
2)
Install the left cabinet upper.
3)
Install the left cabinet.
4)
Attach the take-up roller and fix it with the screw (M4 x 6 S
tight).
E. Installation of the finisher
1)
Remove the package supporting plate from the finisher.
1
2
3
1
2
Edge reference
0 - 3mm
R end reference
0 - 3mm
1
2
1
2
1
2
2
1
1
