-
6
Watching TV
H
Manual adjust
You can set some channel items manually.
1
Repeat steps 1 to 3 in
Auto search
.
2
Press
a
/
b
t
o select “Manual adjust”, and then
press
ENTER
.
3
Press
a
/
b
to select your desired item, and then
press
c
/
d
to adjust the settings.
Item
Description
Storage to
[1~99]
Save programme to your desired
channel number. Press
R
to save.
Sound system
Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)
Colour system
Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Current CH
Select the channel you want to edit.
• Selected channel will be automatically
refl ected in the background.
Search
Start searching from current channel.
• Instead of pressing
c
/
d
to adjust the
frequency, you can set by directly entering
the frequency number of the channel with
0 — 9
.
Press
R
to save.
Fine-tune
Tune the frequency of the stored
channel to your desired position.
• Adjust while checking the background
picture as a reference.
Press
R
to save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
Programme edit
Use this menu to set up a channel individually.
1
Repeat steps 1 to 3 in
Auto search
.
2
Press
a
/
b
to select “Programme edit”, and then
press
ENTER
.
3
Press
a
/
b
to select the channel you want to
edit, and then press
1
to
5
on the remote control
if necessary or press
RETURN
to exit.
• As you toggle down the channels, each channel is
immediately refl ected in the background when you press
ENTER
.
1
(
Erase programme)
Channels can be erased individually.
Press
1
to erase the selected channel.
2
(Label)
You can change channel names individually.
Maximum 5 alphanumerics can be input.
Press
2
to start labelling.
Press
a
/
b
/
c
/
d
to select a character, and
then press
2
again or
ENTER
to save.
3
(Sort)
Channel positions can be sorted freely.
Press
3
to select the channel you want to move.
Press
a
/
b
to move it to the desired position,
and then press
3
again or
ENTER
to save.
4
(
Skip)
Channels with “Skip” set to “On” are passed
over when using
CH
r
/
s
even if selected
while watching the image from the TV.
Press
4
to skip the selected channel.
Press
4
again to cancel the skip.
5
(Lock)
You can block the viewing of any selected
channel.
Password must be set fi rst to allow “
” to
function.
• See page 7 for setting a password.
Press
5
to lock the selected channel.
Press
5
again to unlock the locked channel.
On-Screen Display Menu
Selecting a preset AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “Picture” and “Audio”.
3
Press
a
/
b
to select “AV mode”, and then press
ENTER
.
Selected item
Description
STANDARD
For a highly defi ned image in a normally
bright room.
MOVIE
For a movie.
PC
For PC (Available only when inputting
an HDMI).
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(FIXED)
Changes the image and sound settings
to the factory preset values. No
adjustments are allowed.
NOTE
• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
Programme setup
Digital setting
You can reconfi gure DTV services settings
automatically or manually.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “Programme setup”.
3
Press
a
/
b
to select “Digital setting”, and
then press
ENTER
. If you have already set the
password, enter it here.
• See page 7 for setting a password.
4
Press
a
/
b
to select the desired menu item, and
then press
ENTER
.
H
Auto search
Use this menu to add new services automatically
after auto installation has been completed.
NOTE
• A region or service selection screen may display depending
on the country settings or cable providers selections. Follow
the screen prompts to make the selections.
H
Manual search
Add new services within a specifi ed frequency band.
• Press
c
/
d
to select the frequency and then press
ENTER
.
Analogue setting
You can reconfi gure the TV channel settings
automatically or manually using
Auto search
or
Manual adjust
.
H
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “Programme setup”.
3
Press
a
/
b
to select “Analogue setting”, and
then press
ENTER
. If you have already set the
password, enter it here.
• See page 7 for setting a password.
4
Press
a
/
b
to select “Auto search”, and then
press
ENTER
.
You do not need to do anything during the auto
search. Press
MENU
to exit.
LC-505865LE275X_EN_G446.indd 6
LC-505865LE275X_EN_G446.indd 6
5/18/2015 5:44:47 PM
5/18/2015 5:44:47 PM
