EN 12
16. SUBTITLE
: Enable or disable subtitles.
17. TEXT
: Enable or disable teletext.
18. Play buttons
: Control video or music
play.
Batteries
If your remote control signal is weak, replace
the batteries:
1. Open the battery cover.
2. Remove the old batteries from the battery
compartment, and replace them with fresh
batteries.
Make sure that the ends of the batteries line
up correctly with the +/- markings in the
battery compartment.
Note:
Dispose of batteries according to
environmental directives. Read
Get started
> Environmental efforts > End of use
(Page
8).
Remove batteries from the remote control if
you will not use it for an extended period of
time.
Link operation, controls
Link operation allows you to control your
TV and other HDMI-CEC devices with one
remote control.
Access Link operation controls
1. While you view content from a connected
HDMI-CEC device, press
OPTIONS
.
2. Select
[Show device keys]
, then press
OK
.
3. Select the Link operation control button,
then press
OK
.
Read more on Link operation in
Use more
of your TV > Use Link operation
(Page 27).
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch at the base of
the TV to the
ON
position.
If the TV is in standby, press on the
remote control.
Tip:
If you cannot find your remote control
and want to switch on the TV from standby,
press
CH /
on the front of the TV.
Though your TV consumes very little energy
in standby, it does use some energy. If you
are not going to use the TV for an extended
period of time, switch it off to cut off the
power.
