41
MENU
Power Control
Power Management [Mode1]
Off
Mode2
Mode1
MENU
Power control
Power Save
[Save1]
Standard
Save1
Save2
Auto
Basic adjustment settings
Power management
When set, the power will automatically shut down.
1
Press
MENU
.
2
Press
a
/
b
to select “Power Control”, and then
press
ENTER
.
3
Press
a
/
b
to select “Power Management”, and
then press
ENTER
.
4
Press
a
/
b
to select “Mode1” or “Mode2”, and then
press
ENTER
.
5
Press
MENU
to exit the menu.
A
• Return to the previous menu by pressing
RETURN
.
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the computer and
the signal inputs again, the System stays
off.
• The System turns on again by pressing
POWER button on the Display or
B
on the
remote control unit. (See page 13.)
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the computer and the
signal inputs again, the System turns on.
Selected item
Off
Mode1
Mode2
Power control for PC source
Power control allows you to reduce display brightness
and save energy.
Power save
1
Press
MENU
.
2
Press
a
/
b
to select “Power Control”, and then
press
ENTER
.
3
Press
a
/
b
to select “Power Save”, and then press
ENTER
.
4
Press
a
/
b
to select the desired mode, and then
press
ENTER
.
5
Press
MENU
to exit the menu.
A
• When setting to “Auto”, make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• “Standard” is factory preset value.
• Return to the previous menu by pressing
RETURN
.
