Sharp LC-30HV2M Operation Manual Download Page 14

Page: 14 / 74

Watching TV

Display

AVC System

Off

Flashing red

Red

Green

Display status indicators

Power off

AVC System does not turn on or its AC cord is disconnected.

The System is in standby mode.

The System turns the power on.

AVC System status indicators

Power off

Only the AVC System is in standby mode or the System is in standby mode.

The System turns the power on.

Turning on the power

Press

MAIN POWER

on the Display.

• The POWER indicator on the Display flashes red.

Press

POWER

on the AVC System.

• The System turns the power on.
• The POWER indicator on the Display lights up green and the

STANDBY/ON indicator on the AVC System lights up green.

• If the POWER indicator on the Display and the STANDBY/ON

indicator on the AVC system still light up red, press

on the

remote control unit or POWER button on the Display to turn the
System on.

When turning the AVC System on first

Press

POWER

on the AVC System.

• The STANDBY/ON indicator on the AVC System lights up red.

Press

MAIN POWER

on the Display.

• The System turns the power on.
• The POWER indicator on the Display lights up green and the

STANDBY/ON indicator on the AVC System lights up green.

• If the STANDBY/ON indicator on the AVC system and the

POWER indicator on the Display still light up red, press

the remote control unit or POWER button on the Display to turn
the System on.

• In this manual, “System” above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first

time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 21 to try auto installation from the Setup
menu.

Turning off the power

Press

on the remote control unit or POWER button on

the Display.

• The System enters standby mode and the image on the screen

disappears.

• Both the POWER indicator on the Display and the STANDBY/

ON indicator on the AVC System change from green to red.

Press

POWER

on the AVC System.

• The STANDBY/ON indicator on the AVC System turns off and

the POWER indicator on the Display flashes red.

Press

MAIN POWER

on the Display.

• The POWER indicator on the Display turns off immediately.

• If you are not going to use this System for a long time, be sure to remove

the AC cords from the power outlet.

Off

Red

Green

STANDBY/ON indicator

POWER

button

MAIN POWER

button

POWER indicator

POWER button

Summary of Contents for LC-30HV2M











































































Search results

Summary of Contents for LC-30HV2M

Reviews:

Related manuals for LC-30HV2M

Brands by name

Popular brands

Sharp LC-30HV2M, Operation Manual

Search results

Summary of Contents for LC-30HV2M

Reviews:

Related manuals for LC-30HV2M

Brands by name

Popular brands