GX15
2 – 41
CONFIDENTIAL
4.9. ****mode release
When the handset (phone) does not turn on and enter the normal mode, use this function to change ****mode to the normal mode.
<Operation>
1) Select the COM port on the SPST initial screen and click “****mode release”. The following dialogue box appears.
Figure 80
2) If SPST cannot communicate with the handset (phone), the following message is displayed. Make sure the handset (phone) is turned on and click
“Retry”. To exit, click “Cancel”.
Figure 81
3) When complete, the following message appears.
Figure 82
5. Other tests
SPST does not provide tests of Bluetooth/USB communication. Check them according to the following instructions.
5.1. Bluetooth
1) Connect GX15 to the network and check that a conversation (talking and listening) is possible using a Bluetooth headset.
Recommended Bluetooth headset:
JABRA BT200
PLANTRONICS M1000
PLANTRONICS M3000
2) Connect GX15 to another Bluetooth built-in handset (phone) or PC and check that text data can be transmitted and received properly via Blue-
tooth.
5.2. USB
Connect GX15 and a PC with a USB cable. Check that GX15 is recognised as a device.
If the USB driver for GX15 (SHARP GSM GPRS USB Driver) is not installed on the PC, “Found New Hardware” window appears and “Found New
Hardware Wizard” starts [the handset (phone) is recognised].
Summary of Contents for GX15
Page 7: ...GX15 1 4 CONFIDENTIAL ...
Page 8: ...GX15 1 5 CONFIDENTIAL ...
Page 67: ...GX15 2 59 CONFIDENTIAL MEMO ...
Page 75: ...GX15 4 6 CONFIDENTIAL MEMO ...
