GX15
2 – 20
CONFIDENTIAL
4.5.2 Default setting for the programme.
•
Activate the programme and set defaults.
Figure 40
4.5.3 RF calibration
1. Apply 4 V using a stabilised power supply and turn on the handset (phone).
2. Start “RF calibration & check” on SPST and click “Cal”.
3. When initialisation is complete, the following message appears. Lower the stabilised power supply voltage to 3.7 V and click “OK”.
Figure 41
1) A connected COM port
appears.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the "Cable Offset" values.
6) Auto Dial Setting
GSM 900: 0.60
DCS 1800: 0.95
PCS 1900: 0.96
For cables with connector
QCNWK0138AFZZ/
QCNWK0136AFZZ, set the
values as follows:
When the Auto Dial check
box is checked, an entered
number is automatically
dialled for performance
check.
7) Number Setting
Enter a number for Auto Dial.
Summary of Contents for GX15
Page 7: ...GX15 1 4 CONFIDENTIAL ...
Page 8: ...GX15 1 5 CONFIDENTIAL ...
Page 67: ...GX15 2 59 CONFIDENTIAL MEMO ...
Page 75: ...GX15 4 6 CONFIDENTIAL MEMO ...
