Sharp GX-BT9 Operation Manual Download

Page: 15 / 22

Made for:

●

iPhone 6 Plus

●

iPhone 6

●

iPhone 5s

●

iPhone 5c

●

iPhone 5

●

iPhone 4s

●

iPhone 4

●

iPhone 3GS

●

iPhone 3G

●

iPhone

●

iPod touch (5th generation)

●

iPod touch (4th generation)

●

iPod touch (3rd generation)

●

iPod touch (2nd generation)

●

iPod touch (1st generation)

●

iPod nano (7th generation)

●

iPod nano (6th generation)

●

iPod nano (5th generation)

●

iPod nano (4th generation)

●

iPod nano (3rd generation)

●

iPod nano (2nd generation)

Caution:

Please update your iPod and iPhone unit to the latest software

version before using it. Please visit Apple’s homepage to

download the latest version for your iPod and iPhone.

Notes:



Once the iPod or iPhone is plugged in it will begin

charging.



Fully charge the iPod or iPhone with AC power before

using GX-BT9 battery operation.



The message “This accessory is not made to work with

iPhone” or similar, may appear on the iPhone screen

when:

- battery is low.

- the iPhone is not properly plugged in.

If this occurs, remove and re-connect the iPhone.

■

iPod and iPhone connection

Insert the connector to the iPod or iPhone.

iPhone

Connector

Connect the iPod or iPhone to the unit via USB

connector.

■

iPod or iPhone playback

Press the ON/STANDBY button to turn the power on.

Press the USB /

button on the remote control or the main unit

to select USB function.

Connect iPod or iPhone to the unit. “USB” will appear.

Track number

Press the USB /

button to start playback.

Note:

Stop button ( ) is invalid during iPod or iPhone playback.

■

iPhone playback



Sound will only switch from iPhone to the main unit after

authentication process is completed in approximately 10

seconds.



Incoming calls will pause the playback.



Once the calls are answered, the conversation can only

be heard through the built-in iPhone speaker. Turn on

the iPhone speaker or disconnect the iPhone to start

conversation.

■

To disconnect iPod or iPhone

It is safe to disconnect iPod or iPhone even during playback.

■

Various iPod and iPhone functions

Function

Main unit

Remote

control

Operation

Play

Press in the pause

mode.

Pause

Press in the

playback mode.

Track

up/

down

Press in the

playback or pause

mode.

If you press the

button in the pause

mode, press the

button to start the

desired track.

Fast

forward/

reverse

Press and hold

down in the playback

mode.

Release the button

to resume playback.

Display

____

Press to toggle

display content.

Repeat

____

Press to toggle

repeat mode.

Shuffle

____

Press to toggle

shuffle mode.

Listening to the iPod or iPhone

E-15

Summary of Contents for GX-BT9























Search results

Summary of Contents for GX-BT9

Reviews:

Related manuals for GX-BT9

Brands by name

Popular brands

Sharp GX-BT9, Operation Manual

Search results

Summary of Contents for GX-BT9

Reviews:

Related manuals for GX-BT9

Brands by name

Popular brands