■
Bluetooth
Bluetooth
wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (32
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System:
Bluetooth
Specification version
2.1
Bluetooth
+ Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
●
This unit cannot be used to talk over the telephone
even when there is a
Bluetooth
connection made to a
mobile phone.
●
Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a
Bluetooth
connection.
PORTABLE MUSIC BOOMBOX GX-BT9
REMOTE
SENSOR
■
Pairing
Bluetooth
devices
Bluetooth
devices need to be initially paired first before
they can exchange data. Once paired, it is not necessary
to pair them again unless:
●
pairing is made with more than 99 devices.
Pairing can only be made one device at a time. This
unit can be paired to a maximum of 99 devices. If sub-
sequent device is paired, the oldest device paired, will
be deleted and replaced with the new one.
●
pairing information is deleted while repairing, etc.
Indicators:
Status
PAIRING indicator (blue)
Unconnected
Blinks
Connected
Lights up
However, the indicator status is not displayed during
Bluetooth
standby mode.
■
Pairing with other
Bluetooth
source devices
1
Press the ON/STANDBY button to turn the power on.
2
Press the
BLUETOOTH
/
button on the main unit
or on the remote control to select
Bluetooth
function.
(Pairing indicator blinks.)
3
Perform pairing procedure on the source device to
detect this unit. “GX-BT9 SHARP” will appear in the
detected devices list (if available) in the source de-
vice. (Refer the source device operating manual for
details).
Notes:
●
Place the devices to be paired within 3 feet (1 me-
ter) of each other when pairing.
●
Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating manual
for details.
4
Select “GX-BT9 SHARP” from the source list. If Pass-
code* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
5
Pairing indicator (blue) will stop blinking once the unit
is successfully paired with the source device. (Pairing
information is now memorized in the unit.)
Some audio source devices may connect with the unit
automatically after pairing is completed, otherwise
follow the instructions in the source device operating
manual to start connection.
6
Press
BLUETOOTH
/
button on remote control or
source device to start
Bluetooth
streaming playback.
Notes:
●
If a device such as microwave oven, wireless LAN card,
Bluetooth
device or any other device that uses the same 2.4
GHz frequency near the system some sound interruption
may be heard.
●
The transmission distance of the wireless signal between the
device and the main unit is about 32 feet (10 m), but may
vary depending on your operating environment. If a steel
concrete or metallic wall is between the device and the main
unit, the system may not operate at all, because the wireless
signal cannot penetrate metal.
●
If this unit or the source device is turned off before
Bluetooth
connection is completed, pairing will not be completed and
the pairing information will not be memorized. Repeat step 1
onward to start pairing again.
●
To pair with other devices, repeat steps 1 - 4 for each de-
vice. This unit can be paired to a maximum of 99 devices. If
subsequent device is paired, the oldest device paired, will be
deleted and replaced with the new one.
●
Once a device is ousted or deleted from the pairing list, the
pairing information for the device is also deleted. To listen to
the sound from the device again, it needs to be re-paired.
Perform steps 1 - 4 to pair the device again.
●
GX-BT9 supports
Bluetooth
profile AVRCP 1.4. If your de-
vice supports the same profile (refer to device manufactur-
er’s specification), GX-BT9 is able to control the volume of
the device.
Note:
Some music applications do not support this feature, hence
there will be no volume synchronisation between your de-
vice and the unit even if your
Bluetooth
device supports
such profile.
Listening to
Bluetooth
enabled devices
E-12
