7
RADIO OPERATION
Refer to the instructions on page 8.
Press the RADIO button of the FUNCTION selector.
Slide the BAND selector to the FM, AM, SW1 or SW2 posi-
tion.
Rotate the TUNING control until the desired broadcast is
received. The FINE TUNING control functions only for
SW1 and SW2 bands.
With the BAND selector in the FM position, set the FM
MODE switch to the STEREO position.
Even with the FM MODE switch in STEREO position, mono
broadcasts can be. received if the station is not transmitting
a stereo programme at that time. If stereo reception is
unsatisfactory, set the FM MODE switch to the MONO
position.
• Adjust volume and sound quality (refer to instructions on page
9).
• A D J U S T I N G T H E A N T E N N A Adjust the aerial appropriately to obtain the best reception on the band selected.
FM BROADCASTS
Raise and extend the telescopic rod
aerial. Adjust the position and length of
the antenna until FM boradcast recep-
tion signal is at peak strength.
AM OR SW1 BROADCASTS
Turn or locate the unit to receive peak
signal strength of the AM or SW1
broadcast.
SW1 OR SW2 BROADCASTS
Raise and extend the telescopic rod
aerial vertically to its full length.
10
Summary of Contents for GF-800Z
Page 1: ......
