Sharp FO-77 Page 76 Manual Download

Page: 76 / 89

Problems and Solutions

Dialling and transmission problems

Problem

Solution

No dial tone when you
pick up the handset or
press the

SPEAKER

key.

• Make sure the handset cord is connected to the

correct socket. See

Connecting the handset

page 9.

Dialling is not possible.

• Make sure the power cord is properly plugged into

a power outlet.

• Make sure that the telephone line is properly

connected to both the

TEL. LINE

socket and the

wall socket.

• Make sure that the fax machine is set to tone dial.

See

Dial mode

on page 11.

The power is on, but no
transmission takes place.

• Make sure that the receiving machine has paper.

• Make sure that the telephone line cord is plugged

into the

TEL. LINE

socket, and not the

TEL. SET

socket.

• If the receiving machine is in manual mode with no

attendant, reception will not be possible.

• Check the display for error messages.

• Pick up the handset and check for a dial tone.

Nothing is printed at the
receiving end.

• Make sure that the document for transmission is

placed face down in the feeder.

A distorted image is
received at the other end.

• Noise on the telephone line may cause distortion.

Try sending the document again.

• Make a copy of the document on your fax machine.

If the copy is also distorted, your fax machine may
need service.

all.book Page 74 Wednesday, November 2, 2005 1:03 PM

Summary of Contents for FO-77


























































































Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands

Sharp FO-77, Manual

Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands