Sharp FO-77 Page 45 Manual Download

Page: 45 / 89

Using TEL Mode

3. Receiving

Answering with the fax’s handset

When the fax machine rings, pick up

the handset.

If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.

If the other party first speaks with you
and then wants to send a fax, press

after speaking. (Press before the

sender presses their Start key.)

•

When RECEIVING appears in the
display, hang up.

RECEIVING

Note:

If you have set the Fax Signal Receive setting

(page 45) to NO, press

to begin reception.

Beep

RECEIVING

Using TEL Mode

When the reception mode is set to TEL, you must answer all calls by picking
up the fax machine’s handset or an extension phone connected to the same
line.

To select TEL mode, press

, ,

and .

10-MAY 10:35 TEL

all.book Page 43 Wednesday, November 2, 2005 1:03 PM

Summary of Contents for FO-77


























































































Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands

Sharp FO-77, Manual

Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands