Sharp FO-77 Page 86 Manual Download

Page: 86 / 89

Quick Reference Guide

Sending Faxes

Place your
document (up to
10 pages) face
down in the
document feeder.

Normal Dialling

1. Lift the handset or press

2. Dial the fax number.

3. Wait for the reception tone (if a person

answers, ask them to press their Start
key).

4. Press .

Rapid Key Dialling

Press the appropriate Rapid Key.
Transmission will begin automatically.

Speed Dialling

1. Press .

2. Enter the 2-digit Speed Dial number.

3. Press

Direct Keypad Dialling

1. Dial the fax number.

2. Press

Storing Auto Dial Numbers

1. Press ,

, .

2. Enter a 2-digit Speed Dial number (any

number from (01 to 40).

3. Enter the fax number and press

4. Enter a name by pressing number keys.

(To enter two letters in succession that

require the same key, press

after

entering the first letter.)

5. Press

and then

Receiving Faxes

To set the reception mode, press

, and then

: TEL mode

: FAX mode

: TEL/FAX mode

: A.M. mode

TEL mode:

Answer all calls (even faxes)

by picking up the handset. To begin fax
reception, press

FAX mode:

The fax machine automatically

answers and receives faxes.

TEL/FAX (T/F) mode:

The fax machine

automatically answers and receives faxes.
Voice calls (including manually dialled fax
transmissions) are signalled by a special
ringing sound.

A.M. (

) mode:

Select this mode when

an answering machine is connected to the
fax and the answering machine is turned
on.

A =

B =

C =

D =

E =

F =

G =

H =

I =

J =

K =

L =

M =

N =

O =

P =

Q =

R =

S =

T =

U =

V =

W =

X =

Y =

Z =

SPACE =

all.book Page 84 Wednesday, November 2, 2005 1:03 PM

Summary of Contents for FO-77


























































































Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands

Sharp FO-77, Manual

Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands