Sharp FO-77 Page 30 Manual Download

Page: 30 / 89

Adjusting the Resolution and Contrast

Adjusting the Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a
document.

Note:

The resolution and contrast settings are only effective for sending a

document. They are not effective for receiving a document.

Resolution settings

STANDARD

Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.

FINE

Use FINE for documents containing small letters
or fine drawings.

SUPER FINE

Use SUPER FINE for documents containing
very small letters or very fine drawings.

HALF TONE

Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.

You must adjust the
settings each time
you don’t want to use
the default settings.

The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.

Contrast settings

AUTO

Use AUTO for normal documents.

DARK

Use DARK for faint documents.

all.book Page 28 Wednesday, November 2, 2005 1:03 PM

Summary of Contents for FO-77


























































































Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands

Sharp FO-77, Manual

Search results

Summary of Contents for FO-77

Reviews:

Related manuals for FO-77

Brands by name

Popular brands