Sharp FO-220 Page 20 Operation Manual Download

Page: 20 / 133

GENERAL PRODUCT OVERVIEW

FUNC key

This key is first pressed to select various
tions such as timer transmission, timer poll-

ing, relay broadcasting, confidential transmis-
sion, programming function, printing function,

various initial setting functions and user switch
programming.
When the key is pressed, prompts for availa-

ble modes (functions) appear on the display

MODE key

After the document is set in the document
feeder, when this key is pressed,

appears

on the display; by pressing it repeatedly,
(standard), “FINE” and “H-TONE” (half-tone)

can be selected. “CONTRAST: AUTO” or

“CONTRAST: DARK” appears in the lower sec-

tion of the display. Select the desired mode
depending on the document.

STOP/C

key

This key is used to terminate a transmission,

reception, copy operation, other operations
and alarms. Also serves as a clear key in
programming.

START/COPY

key

This key is used to start

tion or copying. Also serves as the entry key.

TALK

key

Press this key when you wish to talk with the

person on the other end of the line, either be-
fore or after a transmission/reception. When

it is pressed before transmission/reception,
“TALK REQUEST” appears on the display; dur-
ing transmission/reception, the arrow mark on

the display points to “TALK” to indicate that

“talk” has been reserved.

POLL

key

Press this key after dialing if you wish to
receive documents from the unattended re-
mote machine which are in its feeder.

switch

This switch is used to select either automatic

or manual receive mode.

Rapid keys (01-09,

Press one of these keys to dial the telephone

number. Programmed into that rapid key and

labels

automatically transmit any documents that are
in the feeder.
Rapid keys (from

works as a

program key too.
Write on the labels the names of the parties
whose telephone numbers are programmed
with these keys for rapid dialing.

Summary of Contents for FO-220






































































































































Search results

Summary of Contents for FO-220

Reviews:

Related manuals for FO-220

Brands by name

Popular brands

Sharp FO-220, Operation Manual

Search results

Summary of Contents for FO-220

Reviews:

Related manuals for FO-220

Brands by name

Popular brands