manualshive.com logo in svg

Sharp FO-220, Operation Manual, Page: 83 / 133

Share
Download
Sharp FO-220 Operation Manual Download Page 83

XII. ADVANCED FEATURES

81

Step

10

11

12

Operation

Description

START/COPY

START/COPY

Enter a full telephone number (up to 30 digits)

of a receiving unit.

IMPORTANT NOTE: INCLUDE AREA CODE IF
NUMBER IS OUTSIDE CALLING AREA OF RE-
LAY UNIT ALSO INCLUDE ACCESS CODE (e.g.
“1”) BEFORE AREA CODE WHERE NECESSARY.
If a full telephone number is not used, go to
next step.

Press the START/COPY key.
Return to step 10 to enter another full

telephone number, or go to next step.

Press the START/COPY key again.
Machine returns to STAND-BY mode.

2. Clearing the Relay Group Task

 

Operation

START/COPY

Description

STAND-BY mode.

Select the relay program clear mode.

Press the START/COPY key.
Machine returns to STAND-BY mode.

3. Using Relay Request

Use this procedure to send documents to one or more remote machines through

an intermediate relay machine.

NOTES:

l 

To use the Relay Request function, it is necessary to first program the Relay

Task Group.

l 

The number of pages that can be sent in a Relay Request is dependent upon
the available memory space in the relay machine.
(Max. of 40 average pages with the FO-3200 and 70 average pages with the

FO-800-140 pages with an FO-800 that has the optional double memory ca-

pacity.)

l 

To use Relay Request with a particular relay machine, your Remote Terminal

Identification (RTI) must be entered into the Relay 

 List of the relay

machine. Advise remote operator of relay machine.

l 

If relay request is unsuccessful, check Transaction and/or Activity Report for
note on cause.

a

l 

Relay Request can also be set for a later time (see “Timer Relay Request’:
p. 87).

Summary of Contents for FO-220






































































































































Reviews:

No comments