manualshive.com logo in svg

Sharp FO-220, Operation Manual, Page: 56 / 133

Share
Download
Sharp FO-220 Operation Manual Download Page 56

The FO-220 can make a sample copy of documents you may wish to transmit.
This feature allows you to confirm how the copy would look at a receiving

machine and to determine if the MODE key setting needs an adjustment.
With this function, the FO-220 can also act as a convenience copier when
necessary.

NOTES:

If the STOP/C key is pressed during copying, copying will stop and the docu-

ment will be discharged.

During copy operation, the machine is in the MANUAL receive mode.
If a call comes in from a remote machine during this time, first make voice

communication by picking up the handset.
You can begin facsimile reception once the copying operation is complete
by pressing the START/COPY key and hanging-up.
Also you can use the STOP/C key to stop copying immediately.

If you do not use the MODE key, FINE/AUTO-CONTRAST mode in used.

1. Open the document hopper, adjust the

document guide and place the document(s)
face-down in the document feeder.

2. Select the resolution/contrast setting with

the MODE key. (Refer to “Selection of

MODE Key Setting”, p.44.)

FUNC MODE

I

STOP/

Continue

Summary of Contents for FO-220






































































































































Reviews:

No comments