Sharp FO-220 Page 38 Operation Manual Download

Page: 38 / 133

V. PROGRAMMING

G. DATE TIME SETTINGS

The FO-220 has a Timer

which makes it possible to transmit and/or poll

documents at a specific time. In order to accomplish this, the Date Time set-
tings must be programmed. The Date Time settings also appear in various

reports and is added to the top of all transmitted copies along with your TTI
and page number.

NOTES:

To correct/change the currect Date &Time settings, redo the entry operation.

To check the currect Date Time settings, refer to the LCD in the standby

mode.

Example of LCD:

M o n t h D a y Day of

NOV 15

M O N

STAND BY

To check the year setting of the date, print-out and refer to the

List (see
Remember to change the settings when time shifts occur (e.g., daylight sav-
ing time).
If incorrect data is entered during the operation, press the STOP/C key to erase

the previous entry and enter the correct data.

Summary of Contents for FO-220






































































































































Search results

Summary of Contents for FO-220

Reviews:

Related manuals for FO-220

Brands by name

Popular brands

Sharp FO-220, Operation Manual

Search results

Summary of Contents for FO-220

Reviews:

Related manuals for FO-220

Brands by name

Popular brands