Control panel / Display
Normal
Wash normally soiled everyday clothing.
Blanket
Wash strongly for blankets or heavy clothing.
Speedy Wash speedy for not-so-dirty clothing.
Soft
Wash not-so-dirty clothing or a small amount of clothing.
Eco
Wash daily clothing with saving electricity and water.
Baby
Wash gently and rinse thoroughly for baby clothing.
Jeans
Wash sturdy and heavy soiled clothing.
Delicate Wash clothing with the HAND WASH mark.
Air Dry
Program for reducing the time to dry.
After spinning, blow air to clothing in the tub to reduce
the time to dry in the shade greatly.
Tub
Clean washing / spin drying tub. (See “Tub clean”.)
Plug the machine in and then press this key, the machine will turn
on. Press this key again, it will turn off.
Press this key after turning on, the selected program will start.
Press this key again, the operation will pause. Press it once again,
the operation will resume.
Press to select the program.
You can select the program from below according to the kind of
your laundries.
Control panel / Display
Press to set the preset time.
You can select the time from 2-24 hours.
Press to select the water level or add water in the tub during wash.
(See “Add water”.)
When turning on the machine, the digital timer shows “--” .
If select “Air Dry” program, the digital timer displays the air dry
time, unit is MIN.
When washing, the digital timer shows the remaining operation
time, unit is MIN or Hour.
When the preset time is set, the digital timer shows the preset time,
unit is HOUR.
When the trouble occurs, the digital time shows the trouble code.
Displays the water level.
Press to select the spinning time.
(9 min. / 7 min. / blank / 5 min. / 3 min. / Soft spin )
Default setting depends on each program.
When selecting “Air Dry” program, you can also change the time to
dry by pressing this key.
(30 min. / 60 min. / 90 min. Default setting: 30 min.)
Press to select the rinse times. (4 times / 3 times / 2 times / blank / 1 time)
Default setting depends on each program.
Press to select the washing time.
(20 min. / 15 min. / blank / 12 min. / 9 min. )
Default setting depends on each program.
You can turn on/off the soak function by pressing this button for
2 seconds. (See “Soak function”.)
Displayed for the remaining operation time.
Displayed when child lock is set. (See “Child lock”.)
Displayed while setting the preset time or until the preset time comes.
You can see the details of preset program by touching
until the preset time comes.
Blinks during water supply.
INLET
WATER
